A dash mat made for the Ranger PX2 / PX3
The Ford Ranger PX2 / PX3 has a big dash top under a steep windscreen, and in Australian sun that means glare and heat. A Sungrabba mat is shaped around its vents, speakers and sensors so nothing is blocked, and it keeps the dash looking new for as long as you own the vehicle.
The PX Ranger, built from 2011 to 2022, was developed largely in Australia and became one of the country's most popular utes. Most are working vehicles, and the interior shows it.
Made to fit the Single Cab built from September 2015 to July 2022, the Super Cab built from September 2015 to July 2022, and the Double Cab built from September 2015 to July 2022. Part number DMFOR39. If you're not sure which you have, the build date on the compliance plate will tell you.
Less glare, cooler dash
The top of the dash can get hot enough in summer to be uncomfortable to touch, and over time that heat and UV break down the surface. With a mat over it, the dash stays shaded and the reflection that washes out the windscreen is gone. If your dash already has cracks, the mat hides them.
Black or grey, with or without stitching
Choose black or grey. Black is the popular pick and suits most interiors; grey can look better in a lighter cabin. Standard mats are finished in matching thread, or for $10 more we'll edge yours in silver, red, gold, blue, or pink stitching to tie in with the vehicle's colour or trim. There are photos on the custom trim page.
There's more than one version of this dash (PX2, PX3 – With coin tray, without head-up display, without speakers, built Sep 2015 – Jul 2022; PX2, PX3 – With coin tray, with head-up display, without speakers, built Sep 2015 – Jul 2022; PX2, PX3 – Without coin tray, with head-up display, with speakers, built Sep 2015 – Jul 2022; PX2, PX3 – Without coin tray, without head-up display, with speakers, built Sep 2015 – Jul 2022; PX2, PX3 FX4 Max – With Switchbank, without head-up display, without speakers, built Sep 2015 – Jul 2022). Pick the one that matches yours so the mat sits around the right vents, speakers or sensors.
Fitting it yourself
No tools needed. Wipe the dash clean, sit the mat in place, then stick the 4 hook Velcro sheets that come with it onto the dash near the corners and centre where the mat will cover them. Lower the mat and press it down over each one. It stays put but lifts off when you want to clean underneath. Avoid silicone dash sprays under the mat, because they stop the Velcro holding.
Sungrabba dash mats are made in Australia by No Bull Accessories and carry a 10 year warranty. This one is in stock and ships free anywhere in Australia, and like the rest of our range it's matched to the Ranger by build date.